DС 200A.33 - inverter type welding machine with current up to 200A welding with a coated electrode - MMA / argon arc welding - TIG

Factory warranty 36 months

Basic data

Supply voltage, V 380, +10% -15%
Power consumption, kVA, not more than 11
Welding ampere rating (continuously variable), A 5 - 200
Discrecity of welding current regulation, A 1
Mode of arc excitation contact and non-contact
Operating mode continuous and pulse
Modulation frequency in argon arc mode, Hz 300 ± 10
Typical operation of a duty cycle, % (at +20°С) 100
Operating temperature range in argon arc mode, °С -20...+40
Operating temperature range in coated electrode mode, °С -40...+40
Weight, kg 27
Overall dimensions, mm 565х240х445

DC 200А.33- is an inverter device for tungsten inert gas welding (TIG), as well as for manual metal arc welding (MMA) with electrode diameter up to 4 mm, in continuous and pulse modes at currents up to 200A.

DC 200А.33 is indispensable for works which require high efficiency, consistency of operation, and the highest weld quality. Due to its versatility and technological parameters the device is perfectly suitable for manufacturing, assembling and repairing.

DC 200А.33 is known for its reliability and quality, incorporating the latest in specialty welding technology. The ability to digitally program all welding parameters makes for ease of operation unparalleled in the industry.

Functional Capabilities

  • Power supply from current mains and from independent power generators.
  • Mode of contact and non-contact arc ignition at low current.
  • Continuous and pulse operating modes.
  • Two-cycle and four-cycle operating modes.
  • Operating modes memory.
  • Microprocessor control.
  • Arc focusing mode.
  • Adjustable time of current build-up and current decline after the weld. Gradual current build-up is essential for electrode consumption reduction and weld starting place protection, while gradual current decline prevents cratering.
  • Welding current adjustment with remote control ±25 of pre-set.
  • Current and voltage control with use of digital display, gas-flow rate control with rotameter.
  • Ignition current adjustment allows one to set the rate at which the sustainable arc ignition is achieved while preventing burning-through at the starting place of the weld.
  • Gas blow prior to weld and welding bath blow-off after the weld provides maximum protection of the welding bath.
Commercial Department: 007 (8352) 45-60-01
Service Department: 007 (8352) 43-98-48
Reception: 007 (8352) 58-51-70

Youtube канал ООО НПП Технотрон
Whatsapp - НПП Технотрон
Работает на: Amiro CMS